测试

qwer

这个项目的目的是调查的可行性创建一个概念证明电动无人机自主,可以携带不同的载荷(常平架固定相机,相机,携带的案例来运输货物,等等),有一个60 +分钟的飞行时间,最重要的是,激进的设计!必须至少有4个引擎。没有寻找COTS解决方案或类似的解决方案。我希望无人机系统能够模块化执行各种任务。任务(预防犯罪，消防管理，应急响应，情报，火灾调查和损害评估，事故重建，搜索和救援，取证，事件和VIP安全，战术态势感知和目标定位，周边和护航安全，秘密情报，监视和侦察，反海盗，战术舰艇登船、扫雷、应急和灾难反应HAZMAT/CBRNE管理等)有效载荷和飞行特性可能包括:•使用万向节监视，或万向节允许360度FLIR, HD RGB(或HDMI，如果可能)，近红外，NDVI, LWIR，激光雷达•区域地图缓解，灾难恢复，评估，检查等•高速与重型起重能力的紧急医疗设备/药物。o这是针对货物的，理解需要平衡才能确定最大飞行时间。•系绳模式(用于培训和长期态势感知)。o通过缆绳供电单位和有效载荷的可能性。 • Modular, hot-swappable, payload chamber(s) for Sensor Arrays for various scenarios that might include: o Collision Avoidance o Acoustic Detection and Location (Military, Public Services) o Electrochemical and Infrared Imaging Gas & Liquid Detectors (Environmental Air Sensing, Gas and Liquid Leak Detection, CBRNE) o Field Communications (Military) o Radiation Detection (CBRNE) o Ability to drop payloads such as: • Surface Vehicles (Rover, Boat, etc.) • Infrared Beacons • EPIRB (Emergency Position Indicating Radio Beacon) • Sea Dye Markers • Stable in high wind (65+ km/h) environments o Preferably dust and water resistant • Sealed electronics area and designed for all weather flights o With regards to the Gimbal: • Dependable operation in wet, sandy, or humid environments, extreme temperatures, and in sustained winds of up to 50 km/h • Important: This UAS will NOT be weaponized Must be able to transition from Hover to Forward flight while conserving power: - Fixed Wing Flight; or where the Rotor Wing is locked to operate as a fixed wing - Rotary Wing Flight; as a quad copter with sustained hover capability - Conventional Takeoff & Landing - Short Take Off & Landing - Vertical Take Off & Landing - Reversible In-Flight Transition - Reversible On-Ground Transition. In addition, once the transition to forward flight is engaged, I'd like for the engine(s) to be a silent as possible. No parachute or net for recovery, and no launcher to get it airborne. While I'm not looking for a COTS UAV, I would like for it to use COTS Hardware and Software for the build. Rugged, reliable and capable - dependable in extreme environments • Up to 50-minutes endurance with payload, continuous operation model • High wind tolerance o 40 mph (65 km/h) sustained, o 55 mph (90 km/h) gusts Pre-assembled backpack deployment – airborne in minutes • Folding design protects payload & includes battery for powered standby • Payload, battery, arms, and legs are easily replaced in the field without tools Environmental Temperature Range: • -22F to –122F (-30C to 50C) Navigation LED’s • Red/Green • Red/NIR Modular chassis and modular electronics for easy access/replacement Must weigh less than 55 lbs./24kg With regards to dimensions, I think it will depend on how much of these requirements can be satisfied. Mobility is important so, the dimensions should allow for the UAS to fit into a case or similar. The attached images are for reference only. These show VTOL aircraft capable of transitional forward flight. In addition here is a link to a real example. https://www.youtube.com/watch?v=hUNJTAybCQQ

使用提供的CADD文件，准备一个3D演示文稿，现场工作的新操场与景观改善。插图需要有展示的质量，为未来的学生和家庭提供清晰的视觉效果，在接下来的学年期待什么。

找人为我的方程式3赛车设计一个很酷的图形。这个想法是将图像渲染到车辆的3D图像上，并对其进行调整，直到每个人都满意。我们说话的时候，我正在用CAD做一个3D图像，但是我想通过征求关于什么样的图像可以在汽车的不同部分工作以及它如何连接在一起的想法来开始创造性的部分。你会在附件中看到我想要什么样的概念(布加迪，大众等…)，蒸汽朋克，喷气发动机，等等…你也会看到实际的F3的图片。再次强调，一旦我有一个3D版本，这将是最好的工作-所以这第一轮是所有关于找到酷的艺术品，并弄清楚什么地方。我想要钣金铆钉外观(从布加迪)作为主要的他们的f#与切割类似，它是如何做的大众暴露的内脏。我还认为，飞机两侧的大型发动机冷却罩可能是喷气发动机，可能会有小火焰从垂直的呼吸翼中喷射出来——但这只是一个想法。我欢迎任何其他想法。

我们正在寻找替换我们网站上的所有图像:SutroLab.com。我们将需要渲染5个产品:油H2O系统2。3、美酒美酒。白天和夜晚面部油(现在内部有透明珠)纯露机全息角鲨烷(不在网上)