拆开我的浓缩咖啡机

我们正在寻找一个风扇的现代设计，该风扇将由12V直流无刷电机供电。这些设计必须符合所有列出的要求，以符合奖品的资格（请阅读所有要求到最后）：1。设计•现代外观•新设计，无重新设计现有型号•风扇必须使用风扇刀片，所以没有透明型•广泛的观众创新和可访问（见图1 - 情绪板）2.质量•使用优质塑料的高质量完成•组件/零件必须（几乎）无缝3.产品要求3.产品要求•Compact - 参见图像2进行测量•灯•刚性•强大 - 用于颠簸条件•易于使用•静止•不允许使用手指•耐用4.性能•高输出•效率低5.技术要求•使用12V直流无刷电机•使用12V接线•易于使用锁定机构•易于使用定位解决方案产品描述：本次比赛包括设计一款将由12V直流无刷电机供电的风扇．风扇的底座：风扇需要安装在先前设计的底座上（图像3），因此12V布线必须通过风扇从电动机外壳引导到基座中的中心点。风扇刀片：设计风扇刀片是比赛的关键部分。风扇的设计需要促进整体模型的大小限制内的最大叶片表面。此外，风扇叶片具有明显的安全限制，因此需要风扇刀片的捕获。这必须符合整体设计的美学，但不应干扰其性能。 Positioning and locking: The fan needs to be able to turn/pivot in all directions and be able to be locked in any position. The locking mechanism needs to be low tech, easy to use and in line with the esthetics of the overall design. Also it has to be strong and be able to resist bumpy conditions. Motor: The fan will be powered by a 12V motor (for dimensions see image 4). The fan will be operated by a potentiometer mounted on a PCB (for schedule see image 5) of which the form can be shaped to fit the design (needs to have realistic dimensions for production). The motor and the potentiometer are both external components, so selecting or designing them are not part of the contest. It is important that you have taken into account the dimensions of both parts, the wiring that will be used and the weight the motor has. Speed Control: The speed should be controlled through a turning knob connected to the potentiometer. This knob is an integral part of the design and should be aligned with the overall look and feel of the design. Wiring: Wiring is an essential part of the design and needs to be done efficient and realistically. Furthermore the wiring needs to be accessible for assembly and concealed in the design. Overall requirements: • All solutions need to be manufacturable and preferably seamless integrated where possible; • Parts need to be manufactured using injection moulding with minimal mould complexity; • On conclusion all files should be of a professional quality (including STEP files) so they can be handed over to our Injection Moulding partner; • Non injection components should be minimal and easily available in the market or easily manufacturable; • Modern, minimalistic but high quality look & feel is an absolute must. Documentation: Please provide high quality rendering images (in three colors, matted black/grey, glossy white and glossy red)and preferably 3D PDF(.U3D) files during the contest. STEP + STL files are required on completion. Communication: We will provide comments and give feedback on every entry as soon as possible. Also we will use the rating system available on the dashboard and use the discussion board for general information or comments. We will look at every entry and work as fast as we can, so no need to send unnecessary PM’s. Award: We will award the 1st price ($2,000) to the best overall idea that meets - or only needs minor polish to meet - ALL the requirements. Attachments: Image 1 - mood board Image 2 - contrabase Image 3 - flexbase / power source Image 4 - 12V Dc brushless motor Image 5 - PCB

我在找一个机器人割草机的工业设计。我想要一个看起来与众不同的产品。它有两个主要部件，一个机器人和一个基站。我想象机器人大约是12英寸× 12英寸× 8英寸。机器人可以与基站对接。我喜欢白色、橙色或黑色的设计，加上简单的机器人标识:http://www.simplerobots.com/blog/wp-content/uploads/2015/03/logo_inline.pnghttp://www.husqvarna.com/us/products/robotic-mowers/husqvarna-robotic-mowers-for-homeowners/ http://robomow.com/en-GB/product-category/mowers/ https://www.deere.com/en_INT/products/equipment/autonomous_mower/tango_e5/tango_e5.page我附加一个想法我这可能是什么样子,但是我相信你可以做得更好。我将奖励第一名的价格(1500美元)，最好的整体想法，满足或只需要少量的改进，以满足所有要求。我将奖励第二名的价格(500美元)，从创新和独特的角度来看，最好的想法，不管它是否满足要求。我会尽量定期提供反馈。 I recommend starting with low fidelity ideas and getting feedback before refining them. Towards the end of the contest, I will run a survey with around 100 users. I would prefer SolidWorks 2015, but am willing to deal with another format for a great design or designer. This contest will be short. I understand if the final designs are a little rough as I expect to continue refining them (ideally with your help).

我希望创造一种新型服装紧固件。我想要实现的基本规范如下。紧固件由两个部分1.板:(例如连接到背包）2。盘（作为示例连接到手电筒......哪个插入板以产生紧固/锁定）板规格：1。尺寸：不超过17mm x 17mm，深度为2-2.5mm厚2.需要能够将一个12mm的圆形（磁盘）固定在一起。3.插入磁盘的压力磅：10磅以下的目标4.它需要能够容纳100磅的重量5.释放盘的压力，10磅或更少的6.功能：理想的紧固系统将是用20-25度或更少的“扭曲”推。需要有能力“锁定”（在这种情况下锁定意味着，而不是释放，以便用户可以信任紧固件，以保持附加到它的物体，它们不会脱落。7.理想情况下，板材可以容纳磁盘的插入力从允许盘释放的旋转力的分离，使得它可以放置在不同的材料重量上。盘1.磁盘不能超过12mm的直径/尺寸，需要3mm（或更少）厚度。2.磁盘将被连接到另一个物体，将该物体保持在板块。3.理想地需要20-25度或更少的旋转，从板4中释放。理想情况下可以容纳一个直接的“捕捉”插入，或者将“滑雪绑定”脚趾或侧面到侧面。看看灵感的良好概念是夹子自行车销售。材料：对任何可用性开放：需要能够处理至少100,000个插入和释放的磨损和撕裂 losing its strength. MECHANISM: I am open to any form of mechanism including (but not limited to) electric, magnetic spring, rings, teeth, gears, pins etc. LOOK AND FEEL: Modern American style (think Apple), needs to have clean lines, nice smooth face, with a beveled edge etc. as It will be used on a fashion/apparel product. INSTALLATION: The design needs to consider how the factory will install both the plate and disk onto to their respective materials/accessory.

描述：我们正在寻找一个连接/插件系统的设计。该系统应包括两个主要组件;1.将安装在表面（例如墙壁）上的“底座”。2.“触摸基础”对比基座是适配器（附件附件 - 例如，点）单击/按/幻灯片进入基座。注意：配件可以体重高达1公斤（可能在颠簸环境中），需要考虑到“基地”的设计以及“僵局”的基础：1。优选地应该有一个圆形形状，直径约为7厘米，尽可能低，高度低，而不会干扰设计要求。2.将连接到12伏电源点•12伏线从后面（穿过墙壁）或从侧面（在墙上）3。电线应容易地连接到底座的底部。•设计应考虑到用户将12伏电线安装到基座上。•如果线路从基座的侧面连接，则应有一个开口/栅极。4.将使用螺钉固定到表面。 • The design should take into account easy accessibility for the user when mounting on surface. 5. Will pass 12 volt current to the Contra-Base once the Contra-Base is fixed onto the Base through a solution that is: • Low tech • Full proof The Contra-Base: 1. Should click/snap/slide/connect (or other) onto the Base; • Once attached on the Base, the Contra-Base should only be able to disconnect through manual intervention; • The locking mechanism should be very solid and as low-tech and full-proof as possible; • Once locked, the Contra-Base should not be able to turn on the Base, however the placement of the Contra-Base should not be limited by a (single) defined position; • Release mechanism should not be by force, but by intervention. Again, the solution should be as low-tech and full-proof as possible. 2. Should receive the 12 volt current from the Base (see “Base” #5.) and forward it to the accessory (e.g. spot) mounted on the Contra-Base. Requirements: 1. All solutions need to be manufacturable and preferably seamless integrated if possible; 2. To be manufactured using injection moulding with minimal mould complexity; 3. The files should be of a professional quality (including STEP files) so they can be handed over to an Injection Moulding company; 4. Non injection components should be minimal and easily available in the market or easily manufacturable; 5. Modern, minimalistic but high quality look & feel is an absolute must. Also when the Contra-Base is not attached to the Base, the Base should still look good and not technical. Please provide High Quality rendering views + preferably .U3D files during the contest. STEP files required on completion We will award the 1st price ($1500) to the best overall idea that meets – or only needs minor polish to meet – all the requirements We will award a 2nd price ($500) for the best innovative idea for the easy connection solution of the 12 volt wiring to the “Base”. • Needs to be integrated into the design of the “Base”, as low tech as possible and without any complex (expensive) external components. We will award the 3rd price ($500) to the best innovative idea for the 12 volt current transfer solution from “Base” to “Contra-Base” • Needs to be integrated into the design of the “Base” and the “Contra-Base”, as low tech as possible and without any complex (expensive) external components. Attachments: Whiteboard screenshots: 1. Potential Wiring situations; 2. Electrical wire connection to the “Base”; 3. Fixation of “Base” to wall; 4. Fixation of “Contra-Base” to “Base”.

我正在寻找一个家庭管家机器人的工业设计与制造规格。我想要两个模型。一个用触摸屏做脸，另一个不用老虎脸，在眼睛和嘴巴上添加灯光，以显示它在说话。两个模型的设计看起来都像一只可爱的老虎，可选的衣服将机器人打扮成像猴子、鸡、狗、兔子等。请在设计中考虑额外的衣服将如何安全地附着。此外，机器人还需要有一个挂钩，挂钩在婴儿车上，这样它就可以方便地携带出去。采用注塑成型。这里有一些规格的机器人需要具有所以你可以设计因素:大小:56 35 x 35厘米体重:5-8kg底部的大部分重量机器人的外部组件:••可充电电池垫/站可以钩到推车内部组件:•w 1080高清夜视摄像机•2 w发言人22毫米隔膜•麦克风•1 hdmi输出•1 usb输出•1 sd卡插槽•空气质量传感器•感烟探测器•地面检测传感器测距仪传感器•••对象检测传感器4电机反馈控制•头旋转2轴:第1 +/- 90°，第2 +80°/-60°•底座移动360°(2个驱动轮，第3个支撑轮)•充电电池•Wifi和SIM卡环境:坚固耐用，能够承受被撞倒法规:CE和CPSC儿童玩具证书公司名称:智能机器人(写在机器人背面)如果您有任何问题或建议，请随时联系我。 Deliverable: • 2 designs of the robot: 1 with a screen as the face of the robot, 1 without • 1 clothing option design and illustration of how to put the clothes on • 3D animation of the robot illustrating it moving • Manufacturing specification See link for other robots currently on the market: https://www.indiegogo.com/projects/buddy-your-family-s-companion-robot/x/11984391#/story Cute Tigers http://kodomo.benesse.ne.jp/ap/tv/en/ http://www.qiaohu.com/ See attached for manufacturing specification